The ACF-1T is a three-wheel electric forklift built for one thing: working in spaces where a normal forklift cannot. It carries a tonne, turns inside 1,278 mm and weighs only 1,650 kg — light enough to use on a mezzanine or in a goods lift, which is exactly where a lot of buyers struggle to find a forklift that fits. If your warehouse has tight aisles, low ceilings or an upstairs storage floor, this is the kind of truck that solves the problem.
Why the three-wheel layout matters here
The single steered rear wheel is what lets it turn so tightly. At 1,278 mm it pivots in aisles where a four-wheel counterbalance truck would have to shunt back and forth, so you can run narrower aisles and fit more racking into the same floor. The trade-off, as with any three-wheeler, is that it is built for smooth indoor floors rather than rough yard work — which suits the warehouse and retail jobs it is designed for.
Key specifications
The ACF-1T carries up to 1,000 kg and lifts to 3,000 mm on the two-stage mast. It travels at 6 km/h loaded and 8 km/h empty, turns inside 1,278 mm, and runs electronic power steering for precise control in tight spots. A built-in 24V/25A charger means you plug it into a normal socket — there is no separate charging bay to set up, which is part of what makes it practical for a single-truck operation. Full figures are in the spec table below.
Where it earns its place
We see the ACF-1T used most in smaller warehouses with narrow aisles, on mezzanine floors where the floor loading rules out a heavier truck, in retail back-of-house, and in multi-level facilities that need a light forklift they can move between levels. The high ground clearance helps it cope with the odd ramp or uneven joint without grounding the mast, and the ergonomic foot-pedal layout keeps the operator comfortable across a full shift.
Options worth knowing about
The standard forks are 920 mm, and you can order other lengths to match your pallets. Load and drive wheels come in rubber or polyurethane depending on your floor, folding forks are available for awkward loads, and a built-in battery indicator keeps an eye on charge. Tell us what you are lifting and where, and we will spec it to the job rather than sell you a standard build that nearly fits.
Buying from ARAS
We supply and service the ACF-1T across the UAE from our base in Jebel Ali Free Zone, Dubai. If you are weighing it against a heavier four-wheel truck, the honest question is how tight your space really is and how heavy your loads run. Under a tonne in a confined warehouse, this is usually the smarter buy; heavier or outdoors, we will point you elsewhere in the range. Either way, ask us for current pricing and we will talk it through.
Contact us today for a competitive price
Model Specifications
Customers We Served
Frequently Asked Questions
Why pick a three-wheel forklift over a four-wheel one?
The single rear wheel lets it turn in a much tighter circle — 1,278 mm here — so it works in aisles and corners where a four-wheel truck would get stuck. The trade-off is slightly less side-to-side stability on rough ground, which is why these suit indoor, finished floors.
Is it light enough for a mezzanine or a goods lift?
At 1,650 kg it’s one of the lighter 1-tonne trucks around, which is why people use it on mezzanines and in cargo lifts. Always check your floor or lift load rating against the truck weight plus the load first — we can help you run that sum.
What can it lift?
Up to 1 tonne. It’s built for the steady pallet and stock movement you get in smaller warehouses and retail back-of-house, not heavy yard work.
Do you supply and service it in the UAE?
Yes, across all seven emirates from Jebel Ali Free Zone, Dubai.