3 Wheel Performance Forklift

Introducing the AEF3-Series: Advanced 3 Wheel Electric Forklifts

The AEF3-Series three-wheel electric forklift is built for sites where space is tight and uptime matters. The three-wheel layout gives it a short turning radius, so it keeps working in aisles where a four-wheel truck would have to shunt back and forth to line up a pallet. We supply it in 1.6, 1.8 and 2.0 tonne capacities, which covers most warehouse, factory and distribution material handling work across the UAE.

Key Features of the AEF3-Series

Compact chassis for narrow aisles. The 1550 mm turning radius is the main reason buyers choose a three-wheeler. It lets a driver pick and put away in aisles around two metres wide, so you can often fit another racking run into the same floor area.

Capacity and lift height. The series runs in 1.6T, 1.8T and 2.0T models, with mast options up to 6 metres. Choose the capacity for your heaviest regular load at the height you actually lift to — rated capacity falls as the mast goes higher, so the residual figure on the data plate is what counts on the floor.

Built around the operator. Long shifts are easier when the seat, armrests and controls fall to hand. The cab is laid out so everything sits within easy reach, which keeps drivers fresh and throughput steady late in the day.

AC drive and battery. An AC traction and hydraulic system means fewer wear parts than older DC setups and steadier power as the battery discharges. Battery options let you match run time to your shift pattern, whether that is a single day shift or round-the-clock work.

Performance Highlights

On performance, expect travel speeds up to 14 km/h unladen and a lift speed up to 0.32 m/s, with gradeability suited to loading ramps and dock work. Exact figures vary by model and load — the table below has the numbers for each.

3 Wheel Performance Forklift

Together those traits make the AEF3-Series a sensible choice for high-throughput operations: order picking, replenishment and dock-to-stock cycles where the truck is moving for most of the shift rather than sitting idle.

Applications of the AEF3-Series

Where it earns its keep. Warehousing and distribution is the natural home for this truck — narrow-aisle storage, frequent picking, and moving palletised stock between receiving, racking and dispatch. It also suits manufacturing lines and retail back-of-house. Where aisles are too narrow even for a three-wheeler, our articulated forklifts are the next step up in storage density.

Specifications Overview

ModelLoad CapacityLift HeightTurning RadiusMax Speed
AEF3-1.6T1.6 tonsUp to 6 meters1550 mm14 km/h
AEF3-1.8T1.8 tonsUp to 6 meters1550 mm14 km/h
AEF3-2.0T2.0 tonsUp to 6 meters1550 mm14 km/h

The specification table below covers each model in detail. Tell us your typical loads, lift heights and aisle widths and we will recommend the right configuration rather than have you over-spec the truck.

Why Choose the AEF3-Series?

Low running cost. Electric operation and AC drive keep energy use and maintenance down compared with engine trucks, and there is nothing to vent indoors. Reliable in daily use. The build stands up to continuous industrial duty, and with several capacities and mast heights in the range you can spec the truck to the job instead of paying for capacity you will not use.

Conclusion

If you are weighing up a three-wheel electric forklift for a site in Dubai or elsewhere in the UAE, the AEF3-Series is a dependable, fairly priced option with local parts and service behind it. Tell us your loads, aisle widths and shift pattern and we will point you to the right model — or browse the full range of material-handling equipment we supply.

Contact us today for a competitive price

11 + 1 =

Model Specifications

Customers We Served

ADSD Metal FZCO
Quest Vitamins Middle East FZE
SCT Chemicals FZE
Sanipex FZE
Beauty Trade Solution FZE
Almoe Digital Solutions LLC
Al Ghandi Electrical and automation LLC
Masa Trading FZE
Boxco World FZE
ECHO CARGO AND SHIPPING LLC
M POWER BATTERIES TRADING LLC
ONE Refrigeration Manufacturing Co. LLC

Frequently Asked Questions

Which capacity should I choose — 1.6, 1.8 or 2.0 tonnes?

Match it to your heaviest regular load, not the rare one-off. If most pallets sit around 1.4 tonnes, the 1.6T model has enough headroom; if you’re routinely near 1.8, size up so the truck isn’t running at its limit all day. Send us your load profile and we’ll advise.

Can it reach high racking?

Masts are available up to 6 metres, which covers most standard high-bay racking. Taller lifts reduce the residual capacity, so tell us your top beam height and load and we’ll confirm the right mast.

Is 14 km/h fast enough for a busy floor?

For indoor warehouse work, yes. 14 km/h keeps cycle times down without becoming a hazard in the aisles, and most sites cap travel speed below the truck’s maximum anyway.

Do you supply and service these across the UAE?

Yes, across all seven emirates from Jebel Ali Free Zone, Dubai.